Extrusion Line for FEP/PFA/ETFE Cables

• Customization: Available
• Driven Type: Electric
• Condition: New
• Model NO.: XJ-20/25/30/40
• Certification: CCC, PSE, FDA, RoHS, ISO, CE
• Warranty: 12 Months
• Screw: Single-Screw
• L/D of Screw: 28:1
• Motor: Siemens
• Inverter: Yaskawa
• Electrical Components: Omron
• Transport Package: PE Film + Wooden Box
• Specification: CE SGS
• Trademark: NEWTOPP
• Origin: Dongguan City, China
• HS Code: 8479400000
• Production Capacity: 6 Sets/Month

Product Description

Extrusion Line for FEP/PFA/ETFE CABLES
1.Application:
Suitable for FEP(also called F46),PFA and ETFE(also called F40) fluorine plastic  high-frequency cable and coaxial cable extrusion production.
2. Machine Features:
1) Used Widely: Used in insulation extrusion for micro-fine coaxial teflon wire or high-frequency single transmission wire and cale etc.
2) Steady productivity: Optimize design of the screw, make it durable, non coated chrome worn down, non conglutination, productivity steady;
3) High quality: Concentricity:over 93%; OD tolerance:±0.002;
4) Temperature control precise: Adopt SCR power controller or solid-state relay(SSR) , with imported high-quality temperature control table and copper casting heater, temperature zone of machine controlled within ±1ºC;
5) Operate easily: Exclusive adopted NEWTOPP Teflon specialized touch screen, both provide chinese/english operation interface, auto-control and auto-feedback, operate easily;
6)Save place: Adopting integrate design,combined the traditional preheater, straightening, accumulator, capstan, meter-counter and sparker into one, overall length will be reduced more than 5 meters.
3. Technical Parameters:

Model	XJ-20	XJ-25	XJ-30	XJ-40
Pay-off type	Active	Active	Active	Active
Pay-off bobbin	Φ100-200mm	Φ100-200mm	Φ200-300mm	Φ200-300mm
Screw diameter	Φ20mm	Φ25mm	Φ30mm	Φ40mm
Vacuum pump	200W	200W	400W	400W
Screw L/D ratio	28:1	28:1	28:1	28:1
Extrusion output	5kg/h	8kg/h	12kg/h	30kg/h
Main power	3kw Servo motor	4kw Servo motor	7.5HP Servo motor	10 Servo motor
Extrusion OD	Φ0.2-0.6mm	Φ0.3-0.8mm	Φ0.3-1.5mm	Φ0.8-2.5mm
Cooling device	U-type single-layer water trough
Accumulate length	0-100m	0-100m	0-100m	0-100m
Capstan power	1kw Servo motor	2kw Servo motor	2kw Servo motor	2kw Servo motor
Max speed	150m/min	150m/min	180m/min	180m/min
Take-up type	Double shaft	Double shaft	Double shaft	Double shaft
Take-up power	3HP	3HP	4HP	3HP
Take-up bobbin	Φ100-200mm	Φ200-300mm	Φ200-300mm	Φ300-400mm
Size( L*W*H)	8000*1200*2100	8000*1400*2100	9000*1400*2100	12000*1800*2100
Total Weight	3.0 T	3.5T	4T	5.5T

4. Brand of main parts:
1) Motor: Siemens
2) Inverter: Yaskawa or Inovance
3) Bearing: NSK, NACHI, ASCHI
4) Electric components: Omron,Shilin
5) PLC programe: Siemens
5. Safety performances: 
1) Switch-off at overpressure
2) Disabling signal at under temperatures
3) Stop at over temperature
3) Motor power limit
4) Emergency stop
5) Monitoring of tolerances and alarms
6) Monitoring of sensors
6. Machine pictures:


7.Packaging & Shipping
1) Transparent PE film + Wooden box
2) Cardboard wrapping corner to protection, wire rope in fixed to sea ship
3) 20 Feet container for complete production Line equipment
4) Machine dimension: L x W x H = 20m x 2.5m x 3.2m; Unit weight: about 5500 kg/set
8.Our Services
Pre-sale Services:
1) Spot investigation and professional guiding suggestions;
2) Equipment configuration, model selection reference and technical consultation;
3) Onestop service for investment equipment,product developing, new materials researching and personnel training.
Sale Services:
1) Invite customers to inspect and take trials of finished machines;
2) Provide the training of the maintenance knowledge;
3) Improve the design to the operator's requirements.
After-sale Services:
1) Regular maintenance and product tracking service;
2) Cost price for required parts in lifelong period;
3) Provide quality and efficient after-sale service life long time.
9. About us
Dongguan NewTopp Electrical Machinery Co.,Ltd is a high-tech enterprise which specializes in developing and manufacturing wire and cable machines, and our main products includes all kind of extrusion production line, single twisting machine, double twisting machine, cantilever stranding machine, cage-type twisting machine, planetary cabling machine, triple-core stranding with back-twist and taping, and single layer/double layer taping machine etc. and our products have passed CE certification and SGS audited , and we also have passed ISO9001:2008 since 2010.  
10.FAQ
1) Are you a manufacturer or trading company?
We are a manufacturer with more than 10 years of R&D and manufacturing experience in the field of cable machiner, there are more than 6000 square meters of workshop and office space in our factroy; welcome come to visit our factory at any time!
2) How can we get to your factory to see the machines?
Add: No.286 Huai'de road, Humen Town, Dongguan City,Guangdong Province,China. 
Only 40 minutes by car from Shenzhen Baoan International airport to our factory;
Only 2.5 hours by car from Guangzhou Baiyun Airport to our factory; 
Only 17 minutes by high-speed rail from Guangzhou south station to Humen.