Company Introduction:
Dongguan Newtopp Electrical Machinery Co.,ltd is a professional enterprise which is specialized in wire and cable equipment R&D. It locates in the international manufacturing centre --------Humen Town, Dongguan city. With continuous improvement of production technology, the procedure and performance of wire and cable is becoming more and more modernizing and excellent. Our technology always keep advanced level in the peer. The cable equipment business line enjoy highly reputation from partners and professional visitors. Our company has been approved by the ISO9001 and ISO14001 certification as well. The domestic market is very mature for Dongguan Newtopp Electrical Machinery Co.,ltd,We had a lot of trade partners such as Linoya, Tronixin, TTGC, PH, Best, LTK, Desan, Broad, APBG, Maxcable, Ce-link, Choseal, Nistar, Taiyo etc. Also, we are exploring the international market.we have cooperated with many brands from Turkey, Korea, Vietnam, Italy, Malaysia, India etc.
Warmly welcome to our factory and achieve win-win cooperation!
FEP/PFA/ETFE Wire&Cable Extrusion Line
| Model |
XJ020 |
XJ025 |
XJ030 |
XJ040 |
| Machine Usage |
Used for micro-fine coaxial wire,high frequency signal transmission wire and other wire&cable insulation extrusion. |
| Wire Specification |
φ0.2-0.6cm |
φ0.3-0.8cm |
φ0.3-1.5cm |
φ0.8-2.5cm |
| Extrusion material |
ETFE/FEP/PFA |
| Screw parameters |
L/D radio:28:1
Material:Germany hastelloy-276/USA Inconel-600/China CH113 |
| Temperature-control segments(Head+Body) |
3+2 |
| Power |
3KW servo motor |
4KW servo motor |
7.5HP |
10HP |
| Highest output |
5KG/H |
8KG/H |
12KG/H |
30KG/H |
| Highest wire speed |
180M/min |
| Pay off type |
Automatic shaft-type active pay-offs,apply to φ100~300 bobbin,Slider swing rod hammer tension type structure. |
| Take up type |
Double-shaft take-ups with traversing,3HP motor with frequency conversion speed regulation,can single/linkage running,auto stop when reach the set meter. |
A. 70-120mm insulation extruder
| Equipment model |
XJ-70 |
XJ-80 |
XJ-90 |
XJ-120 |
| Usage: |
Power Wire/ computer wire/ building wire/data wire/ high frequency wire insulation/jacket sheath extrusion |
| Wire specification |
1.5-12mm |
2-20mm |
3-25mm |
10-50mm |
| Extrusion material |
PVC/SRPVC/LHNF/PE/PP/PU etc |
| Screw parameter |
L/D ratio:26:1, compression ratio: 2.7-3.2, Screw material:38CrMoAIA, Vacuum heating treatment, Surface Grinding Polishing chromium plating |
| Temperature control segments (body+head) |
5+3 |
5+3 |
6+3 |
6+3 |
| Power |
40HP |
50HP |
60HP |
100HP |
| The highest output |
140KG/H |
180KG/H |
240KG/H |
360KG/H |
| The highest wire speed |
400M/min |
300M/min |
250M/min |
180m/min |
| Movable water tank |
Extension type movable tank, movable lenth is 300mm, over length 1.5m with single segment water dryer. Or as requirement |
| Length of U type cooling tank |
7.5M |
7.5M |
10M |
15M |
| Accumulate wheel parameter(11+10 grooves) |
250 |
300 |
400 |
500 |
| Capstan power |
5HP |
7.5HP |
7.5HP |
15HP |
| pay off type |
How may shafts, active with moter and passive without moter just as request |
| Take up Type |
As request |
B. 120-150mm jacket sheath extruder (bigger machine can be made also)
| Equipemnt model |
XJ120 |
XJ150 |
| Pay off type |
big shaft |
big shaft |
| Bobbin size |
1600-2000 |
2500-3150 |
| Screw diameter |
120 |
150 |
| L/D of screw |
26:1 |
26:1 |
| Extrusion capacity |
360kg/h |
600kg/h |
| Power |
100HP |
150HP |
| Wire specification |
10-50mm |
60-120mm |
| cooling tank |
single layer u-shaped |
Single layer U-shaped |
| Capstan power |
15HP |
20HP |
| Highest wire speed |
180m/min |
100m/min |
| Take up type |
Big shaft |
Big shaft |
C. 50+35 core wire extruder
| 50+35 core wire extruder |
Extruder material: PVC/PE/SRPVC |
| Wire specification:AWG30-AWG24,0.8-2.8 |
| The highest wire speed:1000m/min Semi-auto take up(depends on wire dia); |
| Use for high-speed insulation extrusion for PVC/PE/secondary colour wire and Lan cable(CAT5, CAT5E, CAT6, CAT6A, CAT7) insulation extruder |
| Operating Direction:left or right is allowed (For example:if the take up direction is right, it will call"right hand machine" when face electric box.); |
| Dosage of air-pressure:18m³/Hr |
| Screw parameter: L/D ratio:26:1, compression ratio: 2.7-3.2, Screw material:38CrMoAIA, Vacuum heating treatment, Surface Grinding Polishing chromium plating |
| Pay off type: as request |
| Take up type: as request |
| Center-height:1000mm; |
| ø50mm extruder host+35mm stripping extruder |
| Voltage:Three-phase 410V-450 50HZ or as request |
More cable production line such as data/high frequecy cable USB3.0/3.1, HDMI, DVI, SATA etc, please kindly contact us, thank you.
Audited Supplier 
){kind=link}